耐摩擦保護管-自卷管 FLEXTEX
汽車行業
E-mobility / hybrid
電動/混動
Cable manufacture
線束制造
Machinery and plant engineering
機械和安裝工程
Key properties 主要特性
- Long-term heat resistance of -50°C to +150°C
- 長期工作溫度 -50°C to +150°C
- short-term heat resistance up to +180°C
- 短期耐溫可達+180°C
- Abrasion classification E, standard LV 312-3
- 耐摩擦等級 D, 根據 LV 312-1 標準
- High bending and tensile strength
- 易彎折，抗拉伸
- Physiologically harmless
- 環保無害
- Nominal diameter 5.0 mm to 50.0 mm
- 內徑 5.0 mm to 50.0 mm
- Colour: orange or black
- 顏色：橙色或者黑色
Product description 產品描述
FLEXTEX是一種柔性的PET保護套，用于后續裝配。機織PET設計的柔韌性和彈性以及優良的耐磨效果。FLEXTEX適用于電纜和線路的綁扎，特別適用于機械保護。重疊的縱向狹縫允許在已經安裝的電纜上輕松組裝。組裝FLEXTEX時，套筒在搭接處打開，然后推到需要保護的產品上。FLEXTEX可以很容易地在整個長度內組裝和拆卸。大量的應用程序不需要任何額外的修正。許多應用不需要額外的固定，但如果有必要，可以使用電纜扎帶或軟管夾。FLEXTEX也有自粘版(FLEXTEX SK，用于固定封閉性)。
FLEXTEX is a flexible PET protective sleeve for subsequent assembly. The flexibility and resilient behavior with excellent abrasion resistance results of the woven PET design. FLEXTEX is suitable for bundling cables and lines, especially for mechanical protection because of the properties. The overlapping longitudinal slit alows an easy assembly on already installed cables. To assemble FLEXTEX, the sleeve is opend at the lap and it is pushed over the product which has to be protected. FLEXTEX can easily be assembled in the entire length as well as disassembled again. A large number of applications do not require any additional fixing. A lot of applications do not need an additional fixation but if it is necessary cable ties or hose clamps can be used. FLEXTEX is also available in a self-adhesive version (FLEXTEX SK, for fixing the closure).
Application properties 應用性能
|
Property 性能 |
Standard 標準 |
Test requirements 測試要求 |
Result 結果 |
|
Flame resistance 阻燃性能 |
LV312-2 FMVSS 302 |
Flame exposure 15s Sample location closed 燃燒15S |
Classification C C級 |
|
Shrinkage 收縮性 |
ISO 6722-1 |
Temperature 205°C 溫度205°C |
Requirement achieved |
Aging 老化性能
|
Property 性能 |
Standard 標準 |
Test requirements 測試要求 |
Result 結果 |
|
Hydrolysis test 水解測試 |
LV 312-3 |
1500h at 85°C 85°C 1500 小 時 85% relative humidity 85% 相對濕度 Winding test at room temperature 在室溫做卷繞測試 |
Requirements achieved 達到要求 |
|
Short-term ageing 240h / 205°C 短期老化 240h / 205°C |
LV 312-3 ISO 6722-1 |
Winding test under standard conditions 標準條件下卷繞實驗 |
Requirements achieved 達到要求 |
|
Short-term ageing 375h / 210°C 長期老化 375h / 210°C |
LV 312-3 |
Winding test under standard conditions 標準條件下卷繞實驗 |
Requirements achieved 達到要求 |
|
Long-term ageing 3000h / 180°C 長期老化 3000h / 180°C |
LV 312-3 ISO 6722-1 |
Winding test under standard conditions 標準條件下卷繞實驗 |
Requirements achieved 達到要求 |
|
Temperature and humidity cycling 溫濕度循環 |
ISO 6722-1 |
-40°C to + 175°C Humidity: 80-100% Cycles: 40 溫 度 -40°C to + 175°C 濕度：80-100% 循環： 40 |
Requirements achieved 達到要求 |
Mechanical / physical properties機械/物理性能
|
Property 性能 |
Standard 標準 |
Test requirements 測試要求 |
Result 結果 |
|
Abrasion resistance 耐磨性 |
LV 312-1 |
Temperature 23°C 溫度 23°C frequency: 8 Hz 頻率 8Hz power: 7 N 拉 力 7 N |
Classification D 等級 D |
標準尺寸 
Standard dimensions
|
ID [mm] |
Tol. ID [mm] |
Wd [mm] |
Tol. Wd [mm] |
Ring [m] |
|
5.0 |
overlapping 90°+40°-25° |
0.60 |
±0.25 |
production length on customer specification |
|
8.0 |
overlapping 90°+40°-25° |
0.60 |
±0.25 |
production length on customer specification |
|
10.0 |
overlapping 90°+40°-25° |
0.60 |
±0.25 |
production length on customer specification |
|
13.0 |
overlapping 90°+40°-25° |
0.60 |
±0.25 |
production length on customer specification |
|
16.0 |
overlapping 90°+40°-25° |
0.60 |
±0.25 |
production length on customer specification |
|
18.0 |
overlapping 90°+40°-25° |
0.60 |
±0.25 |
production length on customer specification |
|
19.0 |
overlapping 90°+40°-25° |
0.60 |
±0.25 |
production length on customer specification |
|
25.0 |
overlapping 90°+40°-25° |
0.60 |
±0.25 |
production length on customer specification |
|
29.0 |
overlapping 90°+40°-25° |
0.60 |
±0.25 |
production length on customer specification |
|
32.0 |
overlapping 90°+40°-25° |
0.60 |
±0.25 |
production length on customer specification |
|
35.0 |
overlapping 90°+40°-25° |
0.60 |
±0.25 |
production length on customer specification |
|
50.0 |
overlapping 90°+40°-25° |
0.60 |
±0.25 |
production length on customer specification |
